The Railway Test Facility

Source: RTM Oct/Nov 2018

John de Bono, research fellow at the Nottingham University’s Nottingham Centre for Geomechanics, sheds a light on their Railway Test Facility.

The University of Nottingham’s Railway Test Facility is a full-scale experimental facility for testing a section of full-scale railway track. It is essentially a large concrete pit containing subgrade, ballast and sleepers, and a loading frame which simulates passing trains. Designed and built by members of the university over 10 years ago, the facility has been used to gain much insight to the behaviour and degradation of ballasted rail track, as well as to test new ideas and concepts.

The concrete pit is 4.1m by 2.1m across and 1.9m deep. The lower half  of  the pit  is filled with subgrade (such as compacted silt), or for better repeatability built up with concrete slabs. The upper part of the pit is then filled with around six to  eight tonnes of ballast, depending on the desired depth. Three sleepers are positioned and embedded on top in accordance with industry spacing. A sturdy steel loading frame then straddles the pit, with three hydraulic actuators which are capable of applying large cyclic loads to the sleepers in sequence to mimic a passing train.

The hydraulic actuators are typically used to apply loads of 100 kN, which is considered representative of an axle load of over 20 tonnes. The loads are applied in wavelike (sinusoidal) form, with a phase difference such that when the middle sleeper is under maximum load (100 kN), the sleepers either side are both under approximately half load (50 kN). This was chosen to closely resemble how axle loads are distributed by the rails to the sleepers, and represents the passage of a moving train.

The laboratory set-up allows the subgrade, ballast and sleepers, as well as the loading, to all be controlled, and was designed to allow a complete full-scale study of the performance and degradation of the track. The use of several sleepers, loaded sequentially, makes it possible to capture the combined load effects from neighbouring sleepers.

This is one of the key aspects of the Railway Test Facility, which makes it possible to capture the combined load effects from multiple sleepers. In other words, this means that the middle sleeper and ballast are affected by the presence and loading of the neighbouring sleepers. This provides conditions much closer to reality than if a single sleeper were used, and therefore provides a more realistic indicator of real track/sleeper performance. Among the most common measurements taken when testing a sample of track is the sleeper displacement (settlement), which is measured at multiple points on any sleeper. The stress underneath the ballast and/or subgrade, as well as on the vertical walls, are also routinely measured to understand the stress distribution throughout the track-bed.

Since being built, the Railway Test Facility has been used to investigate the effects of the subgrade type, ballast mineralogy, sleeper material, geogrids, under sleeper pads, and tamping on the track performance. Performance is usually judged in terms of the sleeper settlement after a number of cyclic loads, with tests typically consisting of up to one million load cycles. The nature of the facility allows for any number of things to be measured; for example, aspects such as ballast degradation can be monitored, which was useful in quantifying the damage caused by tamping. This was achieved by using a refurbished Plasser tamping machine, and methodically inspecting the ballast for fragmentation and abrasion afterwards.

Outcomes from experiments using the facility have led to a better understanding of the optimal design and use of geogrids (e.g. effects of size, shape, and material properties), as well as the use of under-sleeper pads and the performance of alternative sleeper materials.

Current work continues with the same strategy, with the aim of improving current methods or developing new ways of minimising ballast degradation, and therefore improving performance and reducing maintenance costs associated with ballasted track. It is hoped one day that the Railway Test Facility will be used to test and develop the rail track of the future, using entirely new materials and concepts.


Enjoying RTM? Subscribe here to receive our weekly news updates or click here to receive a copy of the magazine!


There are no comments. Why not be the first?

Add your comment


rail technology magazine tv

more videos >

latest rail news

View all News

rail industry focus

editor's comment

23/01/2018Out with the old...

Despite a few disappointing policy announcements, especially for the electrification aficionados amongst us, 2017 was, like Darren Caplan writes on page 20, a year generally marked by positive news for the rail industry. We polished off the iconic Ordsall Chord (p32), hit some solid milestones on Thameslink (p40), progressed on ambitious rolling stock orders (p16), and finally started moving forward on HS2 (p14) ‒ paving the way for a New Year with brand-new infrastructrure to... read more >

last word

Encouraging youngsters to be safe on the railway

Encouraging youngsters to be safe on the railway

This summer, Arriva Group's CrossCountry and the Scout Association joined to launch a new partnership to promote rail safety among young people. Chris Leech MBE, business community manager at the TOC, gives RTM an update on the innovative scheme. Recognising that young people are more likely to take a risk trespassing on railway tracks, C... more > more last word articles >

'the sleepers' daily blog

Maximising efficiency requires investment in data, but it’s rewards for rail could be extensive

14/11/2019Maximising efficiency requires investment in data, but it’s rewards for rail could be extensive

Rail Technology Magazine’s Matt Roberts explains the significant role data can play within the future development of the rail industry. Standing as a cornerstone of the UK transport network, the rail industry is forever striving to innovate and maximise efficiency in all aspects of its work. Data is just one such way of achievi... more >
read more blog posts from 'the sleeper' >


Andrew Haines, CE of Network Rail, tells BBC News his organisation could issue future rail franchises

24/06/2019Andrew Haines, CE of Network Rail, tells BBC News his organisation could issue future rail franchises

Andrew Haines, the Chief Executive of Network Rail, has told the Today programme on Radio 4's BBC’s flagship news programme that he wo... more >
Advancing the rail industry with management degree apprenticeships

08/05/2019Advancing the rail industry with management degree apprenticeships

In answering the pressing questions of how current and future generations of managers can provide solutions to high-profile infrastructure projec... more >
Women in rail - is the industry on the right track?

12/03/2019Women in rail - is the industry on the right track?

RTM sits down with Samantha Smith, sole female member of the TransPennine Route Upgrade Alliance Leadership Team, to find out more about encourag... more >
TfN Strategic Transport Plan: not just for transport's sake

22/01/2019TfN Strategic Transport Plan: not just for transport's sake

Peter Molyneux, Transport for the North’s (TfN’s) strategic roads director, has been leading on the development of the seven economic... more >